1. Pro-Sight One & Two

One: Single Camera Universal Inspection System

Two: Dual Camera Universal Inspection System

Single or double camera inspection

Defect or region specific inspection

Mobile - can be moved from line to line

Option to add stress inspection

2. Finish Inspector

Sealing Surface / Finish Inspection

Mobile - Can be moved from line to line

Non-contact - no need to rotate the bottle

3. Wall Thickness Measurement

Hot & Cold End

Single sensor used to measure either Hot or Cold Bottles

Non-contact thickness measurements

Hot or cold bottles - 5 to 500 degrees Celsius

Full bottle scanning

Up to 200 measurement points per bottle

User friendly set-up

Accuracy to 0.01mm

4. Base Inspection

Single Camera
Base Inspection System
Can be mounted over a break in
your conveyor, or with a Pro-Sight supplied ‘Bolt-On Bypass’ with Carryover

5. Base Code Reader

Mould number rejection by reading alphanumeric code on the base of the container.

Can be mounted over a break in your conveyor, or with a Pro-Sight supplied ‘Bolt-On Bypass’.

User Friendly set-up

Up to 200 BPM

Optional bolt-on bypass removes
the need for a break in your conveyor

6. Mould Fin Detector

Sensors that detect and reject containers with sharp seams, pinched necks or offset moulds.

Can be installed on your existing rotating machine
(EG: M machine, FP, Check Detector)

User Friendly Set-Up

Up to 200 BPM

Reject counter with alarm

7. Servo Orientator

User friendly high-speed Orientator with integrated bottle separation

Upstream and downstream line control & automatic belt speed tracking. 200 bpm.

8. Carryover

• Enables Base Inspection and / or Base Mould Number Reading
• Optional bolt on bypass removes the need for a break in your conveyor

9. Star Wheel Separator

• Reversible wheel for left or right hand operation
• With or without control panel
• Direct drive