Cerion GmbH
Beschreibung Type Size  
Cerion Artikel Juni 2013 c-vertica
Laser - Zukunftsweisende Glasveredelung vom Kleinformat bis XXL
PDF 1.700.049 byte show
Cerion Article June 2013 c-vertica
Laser - Glass processing with a future from small formats to XXL
PDF 1.699.212 byte show
Cerion Artikel Glaswelt 9/2013, Laserbearbeitung von Glas
Mehr als nur Oberfläche
PDF 610.501 byte show
Cerion Artikel Stahlbau Nachrichten 3/2013
Große Glasformate dank Cerion
PDF 399.954 byte show
Cerion Article in MosBuild Magazine 2012, Page 23 PDF 14.113.236 byte show
Cerion c-vertica XXL
The c-vertica from Cerion is a powerful inclined bed laser system for the finishing of glass surfaces and subsurface engraving. The machine has a modular design and is aligned with customer requirements. The largest system installed so far can finish glass panels with a size of 10 m x 4 m.
JPG 58.719 byte show
Glass Wall with Laser Engraving and Illumination
Waterproof installation for exterior applications with high-power LEDs in the base
Triple VSG glass from 15 mm HSG / 19 mm Optiwhite ® with subsurface engraving / 15 mm HSG
(Haus am Ginko, Heidelberg)
JPG 161.047 byte show
Façade Glass Panels, Laser Engraving
Even large-surface façade glass panels can be designed individually with the c-vertica from Cerion. (Musikhochschule Norderstedt)
JPG 140.736 byte show
Façade Glass Panels, Laser Engraving
Individual two or three-dimensional decors are engraved inside the glass with the c-vertica at high speed and with great precision. The glass surface remains completely intact during this process; a benefit in cleaning. Impressive effects can be obtained through LED lighting from the edge. (room dividers with landscape design)
JPG 163.556 byte show
Cerion c-vertica JPG 108.131 byte show
Article Glass-Technology International 2/2014
Innovative laser processing and finishing of glass
PDF 6.818.545 byte show