Forma Glas makes big further steps in tumbler and stem ware production systems
Even though being in possession of world’s most advanced technology in glass manufacturing, Forma Glas relentlessly continues to improve their machine’s abilities. In order to reach or even exceed customer’s needs, Forma Glas’ management and engineers continuously set new targets.
One of the latest goals was to raise the output rate of future tumbler and stemware lines, whilst reaching even higher product quality. These two objectives used to be in dissent with each other. This was mostly due to the fact that raising the machine’s speed reduces the pressing time for each item, thereby quickly reaching an unbearable level. Thus need for a completely updated setup arose.
One major step to solve this problem was to implement a new stem press with two hydraulic pressing stations. This almost doubles pressing time of each stem, what raises the output rate to a considerably higher level. In order to keep the blowing machine in step with the enhanced stem press, a servo-electric double gob press was also invented and fully implemented. Using double presses in both machines not only helps to raise the maximum output, but also highly improves glass quality. As a result up to 2300 high-level stem ware products or 2700 tumblers can be produced per hour.
Satisfying the demand for high quality post processing machines
Considering the importance of proper post processing systems for producing high quality glassware, Forma Glas recently decided to reenter this market. Currently a new automatic cracking off machine is being built and will be commissioned at the beginning of next year. This machine uses three separate high level lasers, thus allowing cutting rates almost exceeding the output of aforementioned stemware and tumbler line. This machine is now being sold as “ASA – Automatic Crack Off”, available with 15, 28 or 39 stations; depending on the customer’s demands for speed.
Implementing automatic tableware control systems
Manual quality control of tableware products always used to be a high expenditure for all glass manufacturers. Advanced image processing and software technology now allows implementing an automatic tableware control system. In cooperation with external experts, Forma Glas recently put into operation the first fully automatic system, called TCS (Tableware Control System).
TCS uses up to ten cameras. In combination with a sophisticated software solution, thus allowing detecting virtually all possible flaws in different sizes.
Continuing the company’s development towards an all-in-one supplier
Putting into operation the first cracking off and tableware control systems puts the company in line with its aim to become an all-in-one supplier for tableware products. By now Forma Glas can provide several kinds of presses, high end blowing machines, stem stretching equipment, flame polishing systems, conveyor belts, cracking off machines and tableware control units. Thereby the company can now provide several machineries necessary for high-end tableware production, except for furnaces.
01.02.2018, Forma Glas GmbHprint
Sollte der Inhalt oder die Aufmachung dieser Seiten fremde Rechte Dritter oder gesetzliche Bestimmungen verletzen, so bitten wir um eine entsprechende Nachricht ohne Kostennote. Ich garantiere, dass die zu Recht beanstandeten Passagen unverzüglich entfernt werden, ohne dass von Ihrer Seite die Einschaltung eines Rechtsbeistandes erforderlich ist. Dennoch von Ihnen ohne vorherige Kontaktaufnahme ausgelöste Kosten werden wir vollumfänglich zurückweisen und gegebenenfalls Gegenklage wegen Verletzung vorgenannter Bestimmungen einreichen.