PRESS MACHINE PV12

Nur Gesuche

• Base machine
• 12-stations
• Geneva wheel drive in oil bath
• Sense of rotation: to be specified
• Quick indexing brushless system:
• Min. indexing time with specified maximum table load (moulds and mould holders): 0.55 sec @ 12 x 50 Kg or 0.70 sec @ 12 x 100 Kg
• Base machine includes: machine bed with wheels and screw type height adjustment, driving mechanisms, columns, bridge, pneumatic pump for worm-gear bearing lubrication and
• Table: 12 or 6 moulds, 12 stations, Mould centreline diameter MD = 1950 mm, Overall diameter OD = 2280 mm, Chordal distance (mould centre to mould centre) CD12 = 505 mm, Chordal distance (mould centre to mould centre) CD6 = 975 mm
• Delivery equipment: Metalline to be specified, Complete with: 1 pneumatically operated scoop mechanism, Brackets for troughs and deflectors, 2 sets of different sizes (to be defined with the customer) of scoop, troughs and deflectors
• Movable Funnel: Mounted on the gob feeding station, Max stroke: 100 mm, It positions the gob inside the mould, Quotation n° G9093A – Page 5 of 19
• Hydraulic EHPC pressing equipment: Complete with plunger guiding system, suitable for spring cage operation

Electro-hydraulically operated by control system as specified in the relevant section

• Performance:
  • Pressing force (min / max.): 0,5 – 12 ton (5 – 120 kN)
  • Max. working stroke @ max. production rate : 100 mm @ 38 cpm
  • 150 mm @ 30 cpm
  • 200 mm @ 20 cpm
  • Cylinder full stroke : at least 400 mm
  • Plunger max design linear speed: 500 mm/sec
• Anvil pneumatically operated, wedge type, to support the table at the pressing station
• Take-out: Horizontal stroke operated by brushless motor, Vertical stroke pneumatically operated, Stroke: 500 mm
• Kick-up: Pneumatically operated,
• Mould and glass cooling air system: For fan air @ a pressure of 80 mbar

Including:

• Top cooling air system
• Plenum chamber
• Movable pipe for glass cooling: Up / down movement and open / close air flow operation by timing system, Vertical stroke: 125 mm,
• Nozzles and bottom tube supplied by customer, With manual flow adjustment.
• Fixed pipe for mould cooling: Open / close air flow operation by timing system, Nozzles and bottom tube supplied by customer , With manual flow adjustment.
• Mould lubrication assembly – Acetylene type: For mould lubrication in the station before gob feeding
• Automatic mechanism lubrication system pump included
• Electro pneumatic cabinet: Suitable for dry, clean and pressure controlled compressed air @ 5 bar supplied at Customer care, Complete with air lubricating unit
• Accessories
• Plunger holder with X – Y and rotation manual adjustment
• Mould holder for block moulds
• Pincer head for the take-out
• Vacuum head for the take-out

OPTIONS

• Burner system for Shear mark polishing: For shears mark polishing, Pneumatically operated, Combustion equipment and burners
• Rotating Burner system: For internal surface polishing, Pneumatically operated ,Combustion equipment and burners.
• Hydraulic Ring: Electro-hydraulically operated by control system as specified in the relevant section, Ring force: 4 tons, Ring max linear speed: 500 mm/sec
• Holder and sensor for mould temperature measurement device and temperature visualization

Please, send us your detailed specifications, price estimates and sales conditions for the above range of facilities.